Filter
Top Products
Mac mini (Mid 2010) Take Apart — Logic Board 122
2010-08-03
Reassembly
1 Position the housing
vertically and insert
the logic board
assembly into the
housing.
This allows easier
verication that all
EMI gaskets and clips
are entering into the
housing properly.
Note: If resistance is
encountered, it may
be where the left side
of the logic board
bumps against the
drive carrier.
Maneuver the board
to clear the carrier.
2 Reconnect the power
supply cable before
seating the logic
board assembly
completely.
Tweezers and a black
stick may be helpful.
3 Make sure no cables
are hidden or caught,
then fully seat the
logic board.
4 Reconnect all cables.