Filter
Top Products
Using CVLAN
132 Installation Guide
3. Select the current IP address (135.20.70.6), and overwrite it with the IP address you
want to use. Click OK.
The system displays the Warning dialog box (overwriting deletes the previous client).
4. Verify that this IP address of the client that you want to edit and click Yes.
This completes the procedure to edit (and remove) a client.
Starting the CVLAN Server
This section describes the following methods for starting the CVLAN server:
● Starting CVLAN with the Telephony Services Controller — this procedure starts both the
Telephony Services server (Tserver) and the CVLAN server. This is the recommended
method.
● Starting CVLAN from the Windows operating system — this procedure starts the
CVLAN server only. Use this method to start the CVLAN server independently of the
Tserver.
Starting the CVLAN Server with the
Telephony Services Controller
Follow these steps to start the CVLAN server from the Telephony Services controller (this
procedure starts both the Tserver and the CVLAN server).