Filter
Top Products
Pre-Release 11 Link Administration Instructions
242 Installation Guide
10. Type change node-names
The NODE NAMES screen appears.
11. Follow steps a and b to complete the NODE NAMES screen and define the Avaya CT
server’s name and address.
a. In the Name: field, type the name you want to assign to the Avaya CT server (free-
form field)
b. In the IP Address: field, type the IP address of the G3PBX Driver (default is
192.128.25.20)
12. Type change ip-services
The IP SERVICES screen appears.
13. Follow Steps a through e to complete the IP SERVICES screen and administer the
DLG link on a DEFINITY ONE system.
a. In the Service Type: field, type ADJLK1 (DEFINITY ONE uses link 1 only)
b. In the Local node-option: field, type procr
c. In the Local port: field, type 5678
d. In the Remote node: field, type the name you assigned to the Avaya CT server on
the NODE NAMES screen.
e. In the Remote port: field, type 0 (zero). Remote port is always set to zero.
This completes the procedure for setting up PROCR connectivity to DEFINITY ONE.
For a checklist of these administrative tasks, see Table D-2 on page -247.