Filter
Top Products
DEFINITY ONE Pre-Administration — Setting Up Your Avaya CT Configuration
Issue 1 October 2003 239
IP Address of DEFINITY G3 PBX Driver on
Avaya CT Server (Applies to Either Configuration
Option)
Verify that you have a local IP address for the DEFINITY G3 PBX Driver on your Telephony
Server. You will need this IP address for installing the DEFINITY G3 PBX Driver. You may
obtain this address from the Network Administrator or you may use the default address
provided in the installation program (192.168.25.20) if you have a private LAN (as
recommended) between the Telephony Server and the DEFINITY ONE. This local IP
address should be different from the IP address used for the G3PBX Driver on the Avaya
CT server.
Procedure for Setting Up TN795 PROCR
to DEFINITY ONE (Option 1)
If you are connecting to a DEFINITY via a PROCR running the DLG, follow this procedure.
Note:
Note: Whenever you use the change form of a DEFINITY ONE SAT command,
you must log out for the changes to take effect.
1. Log in to the DEFINITY ONE switch.
2. Type list configuration software-versions
The SOFTWARE VERSIONS screen appears.
3. Check the SOFTWARE VERSION, to ensure that the correct DEFINITY ONE software
version is running on the switch. The following version is appropriate: G3V8c, or later.