Filter
Top Products
Pre-Release 11 Link Administration Instructions
246 Installation Guide
12. Type change ip-services
The IP SERVICES screen appears.
13. Follow steps a through e to complete the IP SERVICES screen, and administer the
DLG link as a DEFINITY ONE system.
a. In the Service Type: field, type ADJLK1 (DEFINITY ONE uses link 1 only)
b. In the Local node: field, type clan1
c. In the Local port: field, type 5678
d. In the Remote node: field type the name you assigned to the Avaya CT server in
Step 8a (NODE NAMES screen).
e. In the Remote port: field type 0 (zero). Remote port is always set to zero.
This completes the procedure for setting up C-LAN connectivity to DEFINITY ONE.
For a checklist of these administrative tasks, see Table D-3 on page -247.
Checklists for DEFINITY ONE
— Before You Install Avaya CT
The checklists in this section enable you to verify that you have completed the switch-
based tasks on DEFINITY ONE. Use the checklist that is appropriate for your
configuration.
● Checklist for DEFINITY ONE with TN795 PROCR (Option 1)
● Checklist for DEFINITY ONE withTN799 C-LAN (Option 2)
Checklist for DEFINITY ONE
with TN795 PROCR (Option 1)
If you have a DEFINITY one with a TN795 PROCR, make sure you have completed these
tasks before you install Avaya CT.