Filter
Top Products
Administering the Switch
44 Installation Guide
Task 1: Administering a Link
This section applies to the following platforms, which rely on the MAPD-based DLG.
● DEFINITY Servers CSI, SI, and R
● Avaya MultiVantage S8700 Media Server for Multi-Connect Configurations
● Avaya MultiVantage S8700 Media Server for IP-Connect Configurations
The objective of Task 1 is administering a link. From the DEFINITY SAT, follow these steps
to complete Task 1.
Note:
Note: Whenever you use the change form of a DEFINITY SAT command, you
must log out for the changes to take effect.
1. Log in to the DEFINITY switch.
2. Type display system-parameters customer-options
The OPTIONAL FEATURES screen appears.
3. Check Computer Telephony Adjunct Links? and make sure it is set to y, (page
2 of the OPTIONAL FEATURES screen in the example above). This setting indicates
that DEFINITY is capable of communicating with an adjunct.
Note:
Note: If this field is not set to "y" then contact your Avaya Account Representative.