![](http://pdfasset.owneriq.net/2/55/255ab963-d6b7-46d4-b496-49939aeb6149/255ab963-d6b7-46d4-b496-49939aeb6149-bge2.png)
9-2
Chapter 9
Cajun P550/P880/P882 Switch User Guide
The following sections explain how to enable IP routing and assign
subnets.
Creating an IP Interface
When you create an IP interface, you activate a location in the
switch that communicates between IP and the embedded software
of the switch.
You can create an I{P interface using either the web agent or the
CLI.
Creating an IP
Interface Using
the Web Agent
To create an IP interface using the web agent:
1. Select Interfaces from the Routing > IP > Configuration group
on the web agent window. The IP Interfaces dialog box opens
(Figure9-2).
* Note: Due to the length of the IP Interfaces dialog box,
it is shown as two figures in Figure9-1.
Figure 9-1. IP Interfaces Dialog Box