Filter
Top Products
Cajun P550/P880/P882 Switch User Guide
Configuring the Routing Information Protocol (RIP)
10-3
Configuring RIP
on the Switch
Using the CLI
To configure the RIP globally on your switch using the CLI, enter the
following command in Configure mode:
cajun (configure)# router rip
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Modifying RIP Interfaces
You can modify RIP interfaces from either the web agent or the CLI.
Modifying RIP
Interfaces Using
the Web Agent
To modify RIP interfaces using the CLI from the web agent:
1. Select Interfaces from the Routing > IP > RIP group on the
Web Agent window. The RIP Interfaces dialog box opens
(Figure 10-2).
*Note: Due to its length, the RIP interface dialog box is
divided into two parts in Figure 10-2.
Figure 10-2. RIP Interfaces Dialog Box