Filter
Top Products
Cajun P550/P880/P882 Switch User Guide
3-1
3
Configuring System
Information
Overview
The following information and procedures are provided in this
chapter and are common to both layer 2 and layer 3 module
configuration:
■ Setting Up Your Laptop or PC Monitor
■ Configuring the Supervisor Module Using the CLI
■ Configuring the Switch Using the Web Agent
Managing System Information
You can manage system information from either the web agent or
the CLI. The following procedures to manage your system
information are provided in this section:
■ Entering General System Information
■ Enabling the Simple Network Time Protocol (SNTP)
■ Setting Summer Time Hours
■ Displaying the Power System Statistics
■ Displaying Cooling System Statistics
■ Performing a Reset
* Note: The last step in each procedure tells you to click Apply
to save any setup or changes you made. This saves the
setup or any changes to the Running config only. The
Startup config has not changed. Therefore, these and
other changes will be lost if your switch goes down or if
you power it off.
To save these changes to the Startup Config, you must
copy the Running config to the Startup config. Refer to
the "Copying Configuration Files," in Chapter 2,
“Initialize and Setup of the P550/P880/P882 Switch”.