Filter
Top Products
11-14
Chapter 11
Cajun P550/P880/P882 Switch User Guide
Figure 11-8. Add OSPF Summary Dialog Box
3. Refer to Table11-5 to configure the Add OSPF Summary
dialog box parameters:
4. Click CREATE to save the new OSPF summary, or CANCEL to
ignore the new summary.
Creating OSPF
Summaries
Using the CLI
To create a new OSPF summary using the CLI, enter the following
command from Configure mode:
cajun(configure router: ospf)# area <area id>
range (ospf summary network) <ospf-summ>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Table 11-5. Add OSPF Summary Dialog Box Parameters
Parameter Definition
Area Select the area ID of the area from which the routes
are aggregated (summary IP address).
Network
Address
Enter the IP address of the network to be advertised.
Mask Enter the subnet mask of the network to be
advertised.
Advertise Select the ability to suppress (disable) or enable
advertisements of this summary. When suppressing,
advertisements of IP routes in this range are also
suppressed.