Filter
Top Products
Multiserver 5000
104
REVIEWING ASYNC-CHANNEL CONFIGURATION
To review async-data channels, enter the View
Configuration menu.
At this prompt, enter the node ID, a slash, and an
async channel or range of channels you wish to
review. (Channel ranges should be in the form:
starting channel, dash, ending channel. For
example, channels B1 through B6 would be entered
as B1-B6.)
After the channel (or range) has been entered, the
Async Channels menu appears.
Choose an option and the configuration
information will display. (Option 4, Switching
Parameters, is reviewed in Section 10.12.) All async
channels in the range will be displayed. If there are
non-async channels in the range, they will not be
displayed.
[node id] CHANNEL CHARACTERISTICS
DATA CODE STOP HOST BUFFER FLOW DELAYS
CH RATE LVL PAR BIT TERM XON XOFF CONTROL CONTROL ECHO CR LF FF
---------------------------------------------------------------------------
A05 9600 8 MRK 1 TERM DC1 DC3 XN/XF NONE ON 0 0 0
A06 9600 8 NON 1 TERM DC1 DC3 XN/XF XN/XF OFF 0 0 0
ENTER CARRIAGE RETURN TO CONTINUE
COMMAND FACILITY MAIN MENU [node id]
VIEW CONFIGURATION
1
VIEW CONFIGURATION [node id]
ASYNC CHANNELS
1
ASYNC CHANNELS
1. CHANNEL CHARACTERISTICS
2. CHANNEL FEATURES
3. EXTENDED FEATURES
4. SWITCHING PARAMETERS
ENTER NODE-ID/CHANNEL# (OR RANGE
OF CHANNELS)(^X TO ABORT):
Async Channel Characteristics. See Table 9-8 for information on each of the characteristics.