Filter
Top Products
CHAPTER 10: Switching Configuration
115
10.7 Asychronous-Channel Switching
Parameters
Control of async-channel switching capability is
configured through the Switching Parameters
menu. To access this menu, follow this menu
sequence:
Enter the appropriate information and press <cr>.
The Switching Parameters menu appears. Each of
the menu options is discussed in Table 10-2.
NOTE: See also Section 10.9, Connect Protocol
Details. The interaction of three switching
parameters—Protocol, Call Inhibit, and
Receive Inhibit—is discussed extensively
there.
COMMAND FACILITY MAIN MENU [node id]
CONFIGURE LOCAL NODES
3
CONFIGURE LOCAL NODES [node id]
ASYNC CHANNEL
2
ASYNC CHANNEL
SWITCHING PARAMETERS
4
SWITCHING PARAMETERS [node id/channel #]
1. CONNECT PROTOCOL [DEDICATED]
2. UNBALANCED RATES [ON]
3. CALL INHIBIT [NO]
4. RECEIVE INHIBIT [NO]
5. CHARACTER SET [ASCII]
6. MATRIX SWITCHING [ENABLE]
7. RESOURCE CLASS
8. DESTINATION NODE/CLASS
9. CHANNEL PASSWORD
CR - ACCEPT ENTRY
M - MAIN MENU P - PREVIOUS MENU
ENTRY:
ENTER TO NODE-ID/CHANNEL#
(^X TO ABORT):