Filter
Top Products
Multiserver 5000
222
ni ADB PROCESS ABORTED Event An attempt to place a call on the dial lines has
LINK # ci failed. This message is displayed by the call
originating modem.
APPLICABLE TO RTS Info In trying to configure an Integral LAN module,
FUNCTIONALITY ONLY you have selected a module location which does not
support RTS functionality. (Most likely there is a
bridge-only product installed in the module location
you selected. This does not require the configure
menu.)
ni BATTERY LOW Alarm Indicates the CMOS battery at node ni is low and a
power loss could result in a cold start of the system.
ni BUFFER OVERFLOW, Alarm Data has been lost at Multiserver node ni,
CHANNEL ci port ci because of an overflow condition.
<BUSY> Dialog Message is sent only to async channel call
originators using matrix switching when the
requested resource is in use by another network
user.
ni BUSY LINK ci Event The automatic dial backup function has encountered
a busy signal over the RX or TX dial lines.
CALL INITIATION ALARM Alarm Unable to connect to X.21 feeder mux after
configured number of tries. Data in buffers has
been discarded.
<CALL IN PROGRESS> Dialog Indicates that an async-call connection is in
progress across the interconnect link.
ni CD ACQUIRE ci Event Indicates carrier has been detected on the mux or
interconnect link indicated by ci.
ni CD LOSS ci Alarm Indicates carrier loss on link ci.
CHANNEL ci CURRENTLY Info The Command Facility Main Menu functions
USING COMMAND FACILITY are already being used by the port indicated (ci).
CHANNEL INOPERABLE Info You have requested channel status for a voice/fax
port that is not operational.
CHANNEL NOT Info An attempt has been made to force
CONNECTED, IN QUEUE disconnect to one of the following:
OR INHIBITED • A port already disconnected
• A port waiting in the queue
• An inhibited port, such as a link.
Screen Display Messages
Message Message Type Explanation