Filter
Top Products
Multiserver 5000
54
ACCESS THE COMMAND FACILITY VIA $CMD
Press <cr>. At the ENTER CLASS prompt, enter
$CMD.
There is no default password. Just press <cr>.
The Command Facility Main Menu appears.
EXITING THE COMMAND FACILITY
To Exit the Command Facility, press <break> or
select option 12. EXIT COMMAND FACILITY.
The DISCONNECT message is displayed.
ENTER CLASS: $CMD
ENTER CLASS PASSWORD: <cr>
COMMAND FACILITY MAIN MENU [node id]
1. VIEW CONFIGURATION
2. STATUS/STATISTICS
3. CONFIGURE LOCAL NODES
4. CONFIGURE/VIEW REMOTE NODE
5. SWITCHING CONTROL
6. BROADCAST
7. DIAGNOSTICS
8. TERMINATE COMPOSITE LOOPBACK
AND INTEGRAL TESTS
9. CLEAR ALARM DISPLAYS
10. RESET
11. INTEGRAL LAN LOCAL MODE ACCESS
12. EXIT COMMAND FACILITY
CR - ACCEPT ENTRY
ENTRY:
EXIT COMMAND FACILITY
12