Filter
Top Products
Multiserver 5000
86
Table 9-3. Sync Channel Characteristics
Option Protocol Default Description
Data Rate DLC 2400 Sets data rate (in bps) for the port. Note: If the
ASCII Bisync 2400 Clocking Source is selected as external, the data
EBCDIC Bisync 2400 rate must be configured the same as that of the
H-P Sync 2400 external clocking source.
RTS/CTS 2400
Sync-Pad 2400 IMPORTANT: Sync data rates are determined by
MICOM DLC 2400 the sync protocol. Table 9-4 gives a summary
MICOM Voice 9600 of the different sync data rates.
Fast Packet 2400
TDM 2400
Channel DLC
TX-Internal/RX-Internal
Sets the port for both receive and transmit clocks.
Clocking ASCII Bisync
TX-Internal/RX-Internal
There are four options from which to choose:
EBCDIC Bisync
TX-Internal/RX-Internal
• TX-Internal/RX-Internal
H-P Sync
TX-Internal/RX-Internal
• TX-Internal/RX-External
RTS/CTS
TX-Internal/RX-Internal
• TX-External/RX-Internal
Sync-Pad
TX-Internal/RX-Internal
• TX-External/RX-External
MICOM DLC
TX-Internal/RX-Internal
See Table 9-5 for applications of the clock signals.
MICOM Voice
TX-Internal/RX-Internal
TDM
TX-Internal/RX-Internal
Maximum DLC 512 Sets the block size in bytes for data transmitted
Transmit ASCII Bisync 512 from the Multiserver to the attached device.
Block Size* EBCDIC Bisync 512
H-P Sync 9876
RTS/CTS 512
Sync-Pad 512
MICOM Voice 1024
Maximum DLC 512 Sets the block size in bytes for data received by
Receive ASCII Bisync 512 the Multiserver from the attached device.
Block Size* EBCDIC Bisync 512
H-P Sync 9876
RTS/CTS 512
Sync-Pad 512
MICOM Voice 1024
(continued on next page)
* Prompt only. No menu.