Filter
Top Products
CHAPTER 9: Data-Channel Configuration
89
MICOM Voice ENABLE
Table 9-3. Sync Channel Characteristics (continued)
Option Protocol Default Description
DSR Control DLC NORMAL When set to NORMAL, remote DTR changes to
ASCII Bisync NORMAL appear on the local DSR. When set to FORCED
EBCDIC Bisync NORMAL ON, remote DTR changes are ignored. The local
H-P Sync NORMAL DSR is forced on when the local DTR is on.
RTS/CTS NORMAL
Sync-Pad NORMAL
MICOM DLC NORMAL
MICOM Voice NORMAL
Fast Packet NORMAL
TDM NORMAL
Priority DLC LOW Sync channels are defaulted to low priority to give
ASCII Bisync LOW precedence to voice/fax channels (which are
EBCDIC Bisync LOW defaulted to high priority). Regardless of priority
H-P Sync LOW setting, a sync channel will always take precedence
RTS/CTS LOW over an async channel. Putting a sync channel on
Sync-Pad LOW high priority will give it equal precedence to a
MICOM DLC LOW voice/fax channel.
MICOM Voice LOW
Figure 9-4. Sync Data Rates
for the Multiserver 5000
Protocol Data Rate (bps)
DLC 1200 to 38,400
ASCII Bisync 1200 to 38,400
EBCDIC Bisync 1200 to 38,400
H-P Sync 1200 to 38,400
RTS/CTS 1200 to 38,400
Sync-Pad 1200 to 38,400
MICOM DLC 1200 to 19,200
MICOM Voice 9600 to 14,400
Fast Packet 1200 to 56,000
TDM 1200 to 48,000