Filter
Top Products
Multiserver 5000
128
For additional information on configuring your
port parameters, refer to Section 9.3, Asychronous
Channels, and for classes, refer to Section 10.8,
Classes.
You may wish to view the async channel
configuration (see Section 10.12, Review
Asynchronous Switching Configuration) to verify
that the channel has been attached to the class.
ASYNC CHANNEL
SWITCHING PARAMETERS
4
SWITCHING PARAMETERS [DENVER/A5]
CONNECT PROTOCOL
1
SWITCHING PARAMETERS [DENVER/A5]
RESOURCE CLASS
7
SWITCHING PARAMETERS [DENVER/A5]
MAIN MENU
M
CONNECT PROTOCOL [DEDICATED]
DTR
2
ENTER TO NODE-ID/CHANNEL#
(^X TO ABORT): DENVER/A5
ENTER RESOURCE CLASS (8 CHARS MAX)
(^X TO ABORT): DTR