Filter
Top Products
Multiserver 5000
94
ASYNC CHANNEL CHARACTERISTICS
The Channel Characteristics Menu is accessed from
the Async Channels Menu as option 1.
The operating parameters associated with all async
terminals are set here The current configuration
for each characteristic is shown in brackets, to the
right of the menu option.
This menu contains all the same options as the
Local Channel Configuration Menu (accessed from
the Command Mode) plus channel end to host/to
terminal, X-ON and X-OFF character, buffer
control and flow control. Each of these
characteristics is explained in Table 9.8. To return
to the previous menu (ASYNC CHANNEL Menu),
enter a
P.
ASYNC CHANNEL
CHANNEL CHARACTERISTICS
1
CHANNEL CHARACTERISTICS [node id/ch #]
1. DATA RATE [9600]
2. CODE LEVEL [8]
3. PARITY [NONE]
4. STOP BITS [1]
5. ECHO [OFF]
6. CHANNEL END TO HOST/TO TERMINAL [TERMINAL]
7. XON CHARACTER [DC1]
8. XOFF CHARACTER [DC3]
9. BUFFER CONTROL [XON/XOFF]
10. FLOW CONTROL [XON/XOFF]
11. CR DELAY [ 0]
12. LF DELAY [ 0]
13. FF DELAY [ 0]
CR - ACCEPT ENTRY
M - MAIN MENU P - PREVIOUS MENU
ENTRY: