Filter
Top Products
Troubleshooting 121
Troubleshooting
4
Check the envelopes. If the envelopes are curled, remove the curling.
(☞ 60) If the curl cannot be removed completely, load the stack with
the curl bending up as shown in the illustration. Make sure none of the
flap of each envelope is not overlapping the envelope below.
5
Insert the stack of envelopes into the sheet feeder with the top edge of
the stack and flaps facing down.
6
Check the paper output receiver. Make sure the setting for envelopes
is selected. (☞ 63)
Problem : Paper does not eject after printing.
1
To eject the last page, press the RESUME button.
2
Make sure your software application sends a form feed (FF) after every
page. For details, refer to your software application manual.