Canon BJC-8500 Printer User Manual


 
78 Canon BJC-8500 User’s Manual
2
Open the printer driver and perform the required settings.
On the Paper control tab, set the Paper Size to A4 (or A3).
Set the Media Type to T-Shirt Transfer.
Check the Paper Feed setting and make sure that it is set to Auto
Sheet Feeder if you are using the sheet feeder or Manual if you are
feeding manually.
3
Extend the paper rest and paper output tray.
4
Load the T-Shirt Transfer in the printer.
The print side must be face up so hold the T-Shirt Transfer with the
printed green lines face down.
5
Execute the print job. After the printed sheet is ejected from the printer,
move it to a clean location and allow it to dry.
For detailed instructions about cutting and transferring the design to
a T-shirt, refer to the instructions you received with your T-Shirt
Transfer TR-201 packet.
Printing on Fabric Sheet
Follow the steps below to load and print on Fabric Sheet. For precautions
and handling procedures, read the instructions included in the Fabric Sheet
FS-101 kit.
Fabric Sheet FS-101 must be loaded manually. Do not attempt to load
Fabric Sheet in the sheet feeder or the paper cassette.
To avoid jams, smearing and other problems, never open the top cover
during printing.
Handle Fabric Sheet FS-101 by the edges. Never touch the surface of
Fabric Sheet, especially if your hands are wet or dirty.
1
Move the paper output receiver guide to the B4 mark on the paper out-
put receiver.
2
Start your software application.
3
Open the BJC-8500 printer dirver and select the appropriate settings for
Paper Size, Media Type, Quality, and Paper Feed. For details refer to
the Windows Print Guide or the Macintosh Print Guide.
4
Click OK to close the printer driver.