Filter
Top Products
Printing on paper and other media 59
Printing on paper
and other media
Printing on Plain Paper and Bubble Jet Paper
Plain Paper (64~90 gsm) or Bubble Jet Paper LC-301 can be loaded in either
the sheet feeder or the paper cassette.
To load Plain Paper or Bubble Jet Paper in the paper cassette
1
Load a stack of paper in the paper cassette. (☞ 37)
■ The paper cassette can hold up to 250 sheets of Plain Paper or
Bubble Jet Paper.
■ Printing can be performed on either side of this paper so load either
side up or down.
2
To avoid paper jams, make sure the front edge of the stack is below the
tabs.
3
Make sure the paper guide is snug (not too tight) against the left side
of the stack.
4
Make sure the paper output receiver paper guide is set to the correct
mark for the paper size you are using.
5
Check the printer driver settings for this media (Print Mode, Paper
Size, etc.). If you are using Windows, refer to the Windows Print Guide
for details. If you are using a Macintosh computer, refer to the
Macintosh Print Guide for details.
During a long print job, do not allow the printed sheets to stack high-
er than 15 mm (about 1/2 inch or approximately 50 sheets).
To load Plain Paper or Bubble Jet Paper in the sheet feeder
1
Load a stack of paper in the sheet feeder. (☞ 44)
■ The sheet feeder can hold up to 100 sheets of Plain Paper or Bubble
Jet Paper.
■ Printing can be performed on either side of this paper so load either
side up or down.
2
To avoid paper jams, make sure the top of the stack is below paper
limit mark on the right side of the sheet feeder.
3
Make sure the paper guide is snug (not too tight) against the left side
of the stack.
4
Make sure the paper output receiver paper guide is set to the correct
mark for the paper size you are using.
5
Check the printer driver settings for this media (Print Mode, Paper
Size, etc.). If you are using Windows, refer to the Windows Print Guide
for details. If you are using a Macintosh computer, refer to the
Macintosh Print Guide for details.