Filter
Top Products
4
Check the leading edge of the stack inside the printer and make sure
that it is below the three tabs at the mouth of the feed slot. If you see
any sheets curling into the feed slot over these tabs, remove the stack
and insert it again. If one or more sheets curl over these tabs, the
paper will not feed correctly.
① Check the paper limit mark and make sure the top of the stack is
below this mark.
② Move the paper guide to the side of the stack until it is snug (not too
tight).
■ If the paper guide is too loose, this can cause paper jams, skewed
feeds or double-feeds.
■ If the paper guide is too tight, this can cause failures to feed,
skewed feeds, or late feeds wherein the print head misses the top
margin and prints directly on the bare platen.
③ If you are loading long paper, pull up the paper rest.
Setting up and using the printer 45
Setting up and
using the printer
Do not exceed the line!
Incorrect Correct
Yellow tab
①
②
③