Troubleshooting 123
Troubleshooting
3
Remove the paper stack from the sheet feeder and fan it to remove
static cling then load it in the sheet feeder again.
Check the leading edge of the stack inside the printer and make sure
that it is below the three tabs at the mouth of the feed slot. If you see
any sheets curling over these tabs into the feed slot, remove the
stack and insert it again.
4
Press and hold down the cassette access cover on the back of the print-
er at Location ③ (☞ 122).
The spring on the cover is very strong. Hold down the access cover
firmly to prevent it from snapping shut quickly and pinching your
hand.
If you see any paper in the printer, remove it with your other hand as you
continue to hold open the cover.
Incorrect
Correct
Yellow tab