Filter
Top Products
Installing the ink tanks
1
Collect the four BCI-8 ink tanks and the Ink Optimizer.
The ink tanks must be installed into the BJ Cartridges in the order
described below. As you insert each ink tank, match its colour with
the colour key above the cartridge holder.
2
Pick up the Ink Tank BCI-8Y (Yellow) and remove the shrink-wrap and
orange protective cap.
Grip the end of the orange film strip ① and pull it away to tear open
the shrink-wrap. Make sure you remove all the shrink-wrap from the
ink tank.
While pressing on the orange protective cap ②, turn it in the direction
of the arrow.
After you remove the protective cap, discard it immediately.
Setting up and using the printer 33
Setting up and
using the printer
Ink Tank BCI-8BK
Ink Optimizer Tank BCI-8WF
Ink Tank BCI-8M
Ink Tank BCI-8Y
Ink Tank BCI-8C
Do not remove this label!
①
②