Filter
Top Products
120 Canon BJC-8500 User’s Manual
7
Make sure the paper size you are using can be loaded in the paper cas-
sette. (☞ 56)
A5 and smaller paper sizes cannot be fed from the paper cassette.
8
Make sure the paper guides are set to the correct marks for the media
you are using.
9
Make sure the paper cassette is not overloaded.
Check the top of the stack of paper in the paper cassette and make
sure that it is not higher than the load limit mark on the paper cas-
sette. Remove paper if the stack is higher than the mark.
10
Press down on the stack and release it to confirm that it bounces back
smoothly. If this movement is not smooth, adjust the horizontal paper
guide so it is not so tight against the side of the stack.
11
Make sure both corners of the front of the stack are below the tabs.
12
Insert the paper cassette and paper output receiver in the printer.
13
Confirm that the paper cassette is inserted all the way into the printer.
Push in the cassette to make sure that it is securely inserted in the
printer.
Problem : Envelopes will not feed.
Load only European DL or U.S. Commercial #10 envelopes in the sheet
feeder. Envelopes must be fed from the sheet feeder. Never attempt to feed
envelopes manually or from the paper cassette.
Never attempt to feed non-standard envelopes with string, plastic
fasteners, transparent windows, etc.
1
Set the paper feed guide on the sheet feeder to the correct mark for the
envelope size you are going to load.
2
Raise the envelope guides on both sides of the sheet feeder.
Both envelope guides must be raised and locked in the up position.
(☞ 60)
3
Prepare 15 envelopes for loading by flattening them to remove air and
curl. (☞ 60)