Filter
Top Products
■ Paper output tray
Holds printed sheets after they are ejected from the printer and stacked
by the paper output receiver. The paper output tray is also the lid of the
paper cassette below.
If the optional cassette is installed, the cassette lid equipped with the
paper output tray extension should always be installed on the paper
cassette directly below the paper output receiver.
■ Paper output tray extension
Before you start a print job with large paper, pull out the paper output
tray extension. Make sure the paper output receiver paper guide is also
set to the correct position for the paper size. The extension has two posi-
tions for large paper. You can simply pull out the paper output tray exten-
sion (A), or you can also pull out the entire paper output tray (paper cas-
sette lid) with the paper output tray extension extended for very large
sizes (B).
During a long print job, do not allow the printed sheets to stack high-
er than 15 mm (about 1/2 inch), approximately 50 sheets of Plain
Paper or 40 sheets of High Resolution Paper HR-101.
■ Paper cassette
Holds up to 250 sheets of Plain Paper (64~90 gsm). A universal-type cas-
sette that can be manually adjusted to accept a wide range of standard
paper sizes. Paper can also be loaded vertically or horizontally for
Portrait or Landscape feeding.
■ Top cover
Covers the interior of the printer. Open the top cover only when you have
to install BJ Cartridges and ink tanks or to clean inside the printer. The
top cover is equipped with a slam-proof hinge that lets the top cover float
down slowly and quietly after you release it.
Getting acquainted with your printer 17
(A)
(B)
Paper output receiver
Paper output tray (cassette lid)
Paper output tray extension
Paper cassette
Paper output receiver
Paper cassette
Getting acquainted
with your printer