Filter
Top Products
Printing on paper and other media 87
To install the photo ink tanks
The ink tanks must be installed in the BJ Cartridges in the order
described below. As you insert each ink tank, match its colour with
the colour key above the cartridge holder.
1
Collect the three BCI-8P ink tanks.
2
Pick up the Ink Tank BCI-8PM (Magenta) and remove the shrink-wrap
and orange protective cap. Grip the end of the orange film strip ① and
pull it away to tear open the shrink-wrap. Make sure you remove all
the shrink-wrap from the ink tank.
While pressing on the orange protective cap ②, turn it in the direction
of the arrow.
After you remove the protective cap, discard it immediately.
Ink Tank BCI-8PC Photo
Ink Tank BCI-8PBK Photo
Ink Tank BCI-8PM Photo
Do not remove this label!
①
②
Printing on paper
and other media