Filter
Top Products
Installing the BJ Cartridges
This section describes how to install the BJ Cartridges in the printer. The BJ
Cartridges must be installed in the printer before you install the ink tanks.
Two BJ Cartridges must always be installed in the cartridge holder.
This printer employs two BJ Cartridges: the Black BJ Cartridge BC-80 and
the Color BJ Cartridge BC-81. An additional BJ Cartridge, the Color BJ
Cartridge BC-82 Photo, is also available to replace the Black BJ Cartridge
BC-80 for special print jobs.
Always follow these important guidelines regarding BJ Cartridges:
■ Never attempt to install a BJ Cartridge of another manufacturer.
■ Each BJ Cartridge is equipped with slots to hold specially designed ink
tanks. You must always use the correct ink tanks for the BJ Cartridges.
■ The Color BJ Cartridge BC-82 Photo holds three ink tanks (Cyan, Black,
Magenta). This cartridge is designed to deliver photo-realistic prints of
photographic images on High Resolution Paper HR-101. For details about
the driver settings for this special BJ Cartridge, refer to Windows Print
Guide or the Macintosh Print Guide.
■ BJ Cartridges are delicate and the ink tanks contain wet ink, so always
handle them carefully.
■ Do not unwrap a BJ Cartridge until you are ready to install it.
■ Install a BJ Cartridge in the cartridge holder as soon as you unwrap it and
remove the protective cap.
Setting up and using the printer 27
Setting up and
using the printer
Black BJ Cartridge
BC-80
Color BJ Cartridge
BC-81
Color BJ Cartridge
BC-82 Photo