Filter
Top Products
Paper to Prepare
Rolls An unused roll at least 10 inches wide
Sheets Standard Adj. : One sheet of unused paper of at least A4/Letter size
Advanced Adj. : Two sheets of unused paper of at least A4/Letter size (or one sheet when using A2 or larger)
Execute Auto Band Adj. as follows.
1. Load paper.
• Attaching the Roll Holder to Rolls →P.623
• Loading Rolls in the Printer →P.628
• Loading Sheets in the Printer →P.651
Note
• Always
make sure the loaded paper matches the type of paper specified. Adjustment cannot be com-
pleted correctly unless the setting value matches the loaded paper.
2. Press the Menu button to display MAIN MENU.
3. Press ▲ or ▼ to select Adjust Printer, and then press the ▶ button.
4. Press ▲ or ▼ to select Auto Band Adj., and then press the ▶ button.
5. Press ▲ or ▼ to select Standard Adj. or Advanced Adj., and then press the ▶ button.
6. Press ▲ or ▼ to select Yes, and then press the OK button.
A test pattern is printed for band adjustment.
Adjustment is now finished if you have printed on a roll or on sheets of A2 size or larger.
7. If
you are printing on sheets smaller than A2 size for Standard Adj., a confirmation message is shown on the Dis-
play Screen, requesting you to continue printing. Press the OK button and follow the instructions on the Display
Screen.
Manual Band Adjustment (Manual Band Adj)
If printed images are affected by banding in different colors, adjust the amount that paper is fed.
Use Manual Band Adj for transparent media or other paper for which adjustment with Auto Band Adj. is not possible.
We recommend automatic adjustment for other types of paper. (See "Auto Band Adjustment (Auto Band Adj.).") →P.677
Always check the Feed Priority setting before using Manual Band Adj. (See "Selecting a Feed Amount Adjustment
Method (Feed Priority).") →P.676
Adjustments for Better Print Quality
>
Adjusting the feed amount
>
Manual Band Adjustment (Manual Band Adj) iPF815
8
678
Downloaded from ManualsPrinter.com Manuals