Filter
Top Products
c.
Data lamp (Green)
•
Flashing
During printing, the Data lamp flashes when the printer is receiving or processing print jobs. Otherwise, this lamp
flashes when the print job is paused or the printer is updating the firmware.
•
Off
There are no active print jobs when the Data lamp is off.
d.
Message lamp (Orange)
•
On
A warning message is displayed.
•
Flashing
An error message is displayed.
•
Off
The printer is off or is operating normally.
e.
Paper Source Section
After you press the Feeder Selection button, the lamp for your chosen paper source is lit.
1.
Roll Media lamp (Green)
•
On
Indicates that a roll is selected as the paper source.
•
Off
Indicates that a sheet is selected as the paper source.
2.
Cut Sheet lamp (Green)
•
On
Indicates that a sheet is selected as the paper source.
•
Off
Indicates that a roll is selected as the paper source.
f.
Feeder Selection Button
Switches the paper source. Each time you press this button, the paper source switches between the roll and the sheet,
and the corresponding lamp on the Paper Source Section is lit.
g.
Display Screen
Shows the printer menu, as well as the printer status and messages.
h.
Color Label
This label indicates the Ink Tank color. The label corresponds to the ink level on the Display Screen.
i.
HDD lamp (Green)
•
On
Indicates the printer is accessing the hard disk.
•
Off
Indicates the printer is not accessing the hard disk.
j.
◀ Button
Menu mode: Press this button to display the menu one level higher.
Printer Parts
>
Control Panel
>
iPF815 Control Panel
9
693
Downloaded from ManualsPrinter.com Manuals