Filter
Top Products
Cannot Load Sheets
Cause Corrective Action
The paper source selection is incorrect. Press the Feeder Selection button to activate the Cut Sheet lamp.
Paper is not cut straight
Cause Corrective Action
The paper is bent or curled at the cut position. Straighten out any curling by the edges of the paper.
Paper rises by the ends of the cut position before it is cut. Reload the paper correctly.
Paper is not cut
Cause Corrective Action
In the printer driver, No or Print Cut Guideline
is specified in Auto Cut.
Specify Yes in Auto Cut in the printer driver.
In MAIN MENU, Eject or Manual is specified
in Cutting Mode.
Specify Automatic in Cutting Mode in MAIN MENU.
Rolls are not cut when you are using the Media
Take-up Unit.
Either execute Paper Cutting in the Control Panel or lift the Re-
lease Lever and cut the roll with scissors.
(See "Removing Printed Documents from the Media Take-up
Unit.") →P.761
The Media Take-up Unit Continues Rotating
Cause Corrective Action
There is a foreign object in the path of the Media Take-up Sensor (indicated
by a dotted line).
Remove the foreign object from the
Media Take-up Sensor path. Arrange
the Basket Cloth and Basket Rod so
they do not interfere with the Media
Take-up Sensor.
Troubleshooting
>
Problems Regarding Paper
>
iPF815 Cannot Load Sheets
12
861
Downloaded from ManualsPrinter.com Manuals