![](http://pdfasset.owneriq.net/b/bd/bbd075d0-e989-4dc2-9c6b-92fd40d0d151/bbd075d0-e989-4dc2-9c6b-92fd40d0d151-bg79.png)
Chapter 7 Receiving Fax Documents 7-1
Receiving Fax
Documents
Chapter 7
Receiving Fax Documents
This chapter explains how to receive fax documents with your
MultiPASS 1000. It includes:
❏ Receiving documents over a dedicated fax line
❏ Receiving both documents and telephone calls over a shared
fax/telephone line (FAX/TEL SWITCH)
❏ Receiving documents in memory
❏ Receiving documents manually
❏ Receiving documents using an extension telephone
❏ Customizing the receiving operations
• Receiving oversized documents
• Setting up special receiving features
• Customizing the FAX/TEL SWITCH feature
• Restricted receiving
• Customizing the receiving speed
The procedures for receiving depend on whether you use the
MultiPASS 1000 for both fax and telephone communication or just
for fax communication.
❏ If you have one phone line in your office, you probably intend
to use the MultiPASS 1000 for both fax and telephone
communication.
❏ If you have two phone lines in your office, you probably plan
to use one line for the MultiPASS 1000 and the other line for
your telephone.
C
Do not pull received documents or printouts from your MultiPASS
1000. Always wait until the unit ejects a page completely and beeps
before you remove a page. If you pull a document out before it is
ejected, the message
DARK PAPER USED
may appear in the LCD
display. If you see this message, refer to Chapter 14, Troubleshooting.