Filter
Top Products
5-12 Sending Fax Documents Chapter 5
Selecting Document Settings
You can use the MultiPASS 1000’s USER SETTINGS to register a
document type and to change the default density setting used by
the MultiPASS 1000.
Type of Document
Before using the TYPE OF DOCUMENT setting on the operation
panel, you must select a document type through the USER
SETTINGS
. The MultiPASS 1000 allows you to choose from six
different document types:
❏ HALFTONE
For documents containing intermediate tones, such as a
photograph. Use this setting for black and white or color
photographs.
❏ AA (Auto Adjust)
For documents containing both photographs and text.
❏ BLUEPRINT
For blueprints or blue-colored line drawings. The quality of the
reproduction will depend on the contrast of the original.
Generally, the higher the contrast, the better the reproduction.
❏ TRACING PAPER
For slightly transparent documents, such as line drawings on
tracing paper or similar material.
❏ HIGHLIGHT MARKER
For typewritten documents that you have marked with a
colored felt-tip pen or a highlight marker. Highlights made
with blue or green markers may not reproduce clearly.
❏ IMAGE REVERSAL
For documents within which you want to reverse the tones; for
example, you can change white areas to black and vice versa.
If the document you are sending has a large white area,
remember that reversing an image may create an all black
background that requires a lot of ink.
After you register a setting, you can select it when sending a
document by pressing the DOCUMENT (resolution) button until the
TYPE OF DOCUMENT light comes on. The setting remains in effect
until you register a new one.