Filter
Top Products
Chapter 7 Receiving Fax Documents 7-7
Receiving Documents in Memory
When the MultiPASS 1000 is set for automatic receiving and the
paper or ink runs out, the unit stores incoming documents in
memory. The MultiPASS 1000 can store up to 70 letter-size pages
(based on CCITT #1 Chart).
When the MultiPASS 1000 receives documents in memory, you see
one of the following messages and you must perform one of the
following actions:
LCD display Action
Load paper into the paper
cassette.
Install a new ink cartridge.
Press STOP.
Load clean, white paper into
the paper cassette. Press
STOP.
Clear the paper jam. Press
STOP.
See Chapter 14, Troubleshooting, for details on these messages.
To print the received documents stored in memory, follow these
steps:
1. Press START/COPY.
The MultiPASS 1000 begins printing the received pages stored in
memory.
❏ After printing the pages, the MultiPASS 1000 erases the
documents in memory. The ALARM light will stop blinking.
❏ If there is a power failure or you unplug the MultiPASS 1000
while documents are stored in memory, the documents are
erased.
MEMORY COPY
06/09/95 20:17
REC. PAPER JAM
06/09/95 20:17
DARK PAPER USED
06/09/95 20:17
CHANGE CARTRIDGE
06/09/95 20:17
SUPPLY REC. PAPER
Receiving Fax
Documents