Filter
Top Products
8-2 Using the Telephone, an Answering Machine, and a Modem Chapter 8
Making a One-touch Speed Dial Telephone Call
To dial a telephone number at the press of one button, use one-
touch speed dialing. Before you can use one-touch speed dialing,
you must register the telephone numbers in your MultiPASS 1000.
See Chapter 6, Using Automatic Dialing, for details.
After registering the one-touch numbers, you can make a speed
dialing call as follows:
1. Press ON HOOK or lift up the handset.
2. Press the one-touch speed dialing button you wish to call.
❏ If no number is registered for the one-touch speed dialing
button you pressed, the LCD display shows the message
NO TEL #. Make sure you pressed the correct one-touch
speed dialing button and that the number you want to dial
is properly registered.
❏ If you make a mistake by pressing the wrong one-touch
speed dialing button, press STOP. Then go back to step 1.
Receiving Calls and Documents Automatically on
a Shared Fax/Telephone Line
To receive both telephone calls and fax documents automatically,
you first set the MultiPASS 1000 for both fax and telephone
communication as described on page 7-4. Then you can turn on
automatic receiving for calls and documents.
1. Make sure you set the MultiPASS 1000 for both fax and
telephone communication (
FAX/TEL SWITCH is ON).
2.
Press the ANS HOOK UP/MANUAL button.
❏ Make sure both the ANS HOOK UP and MANUAL lights
are off.
MANUAL
ANS HOOK UP
TEL= 12345678900
T01 CANON PHONE
02
TRANSMISSION
DELAYED
03
POLLING
DELAYED
04
POLLING
06
BROADCAST
RELAY
07
REPORT
09
+
10 11
13
SP ACE
14
CLEAR
15 16
08
HELP
01
MEMORY
TRANSMISSION
05
CONFID.
TRANSMISSION
12
PRINT
FILE