Filter
Top Products
Chapter 10 Special Sending Procedures 10-15
Using one-touch or coded confidential sending
1. Make sure the receiving party has a Canon fax with
confidential receiving capability.
2. Find out the confidential mailbox number of the receiving
party.
3. Make sure the fax number is registered for confidential
sending.
4. Place the document into the Automatic Document Feeder
(ADF).
5. To use memory sending or to send to more than one
destination, press FUNCTION and then press MEMORY
TRANSMISSION
. Otherwise, skip this step.
6. Press the one-touch speed dialing button or press CODED
DIAL/DIRECTORY
and the two-digit code that you registered
for confidential sending.
❏ If you are using direct sending, you can only send to one
location.
❏ If you are using memory sending, you can send to up to 97
locations. See page 10-1 for details.
• First make sure that each speed dialing number is
registered for confidential sending.
• You can also use one-touch or coded speed dialing
buttons registered for group dialing as long as each
number in the group is registered for confidential
sending.
If you are using memory sending, the MultiPASS 1000 scans the
document into memory. See page 5-6 for details.
The MultiPASS 1000 sends the document. See Transmitting the
Document on page 5-11 for details.
DOCUMENT READY
MEMORY
Special Sending
Procedures