Filter
Top Products
Chapter 3 Registering Information in the MultiPASS 1000 3-1
Registering
Information
Chapter 3
Registering Information in
the MultiPASS 1000
This chapter describes how to register information in your
MultiPASS 1000. It includes:
❏ Registering guidelines
• Using the menu system
• Entering numbers
• Entering names during registration
❏ Personalizing your MultiPASS 1000
• Identifying your documents
• Setting the date and time
• Registering your fax number
• Registering your name
❏ Customizing the MultiPASS 1000
• Customizing your ID
• Customizing the LCD display
• Customizing MultiPASS 1000 sounds
Guidelines for Registering Information
When you are registering information in your MultiPASS 1000,
follow these guidelines:
❏ If you pause and do not make an entry for more than 60
seconds, the MultiPASS 1000 returns to standby mode. You
must start the procedure over from the beginning.
❏ If you make a mistake while entering registration information,
you can press STOP and start the procedure over from the
beginning, or you can press CLEAR (on the one-touch speed
dialing keypad) and re-enter the current information.
❏ If the MultiPASS 1000 rings while you are entering registration
information, press STOP and lift the handset.
• If you hear nothing or a slow beep, someone is trying to
send a fax; press START/COPY.
• If it is a phone call, you can converse normally.
After the call, start the registration procedure again from the
beginning.