Filter
Top Products
9-8 Using Special Dialing Chapter 9
8. Press the arrow buttons until the type of ringing pattern you
want to set appears. Choose from:
1.NORMAL RING
2.DOUBLE RING
3.SHORT-SHORT-LONG
4.SHORT-LONG-SHORT
5.OTHER RING TYPE
9. Press START/COPY.
10. Press the arrow buttons until the communication type you
wish to assign to the ring pattern just selected appears. Choose
from:
TEL—Ringing pattern assigned to telephone number
FAX —Ringing pattern assigned to fax number
FAX/TEL SWITCH—Ringing pattern assigned to shared
fax/telephone number
11. Press START/COPY.
12. If you want to set the ringing pattern for other numbers, start
again with step 8. Otherwise, press STOP.
N
When
DRPD
is set to
ON
, the communication type for each ringing
pattern defaults to
FAX
. After you select the ringing pattern that
has been assigned for your fax communications, you must set the
other ringing patterns to
TEL
. Otherwise, the MultiPASS 1000 may
answer as a fax for each ringing pattern.
DOUBLE RING
DATA ENTRY OK
< >
DOUBLE RING
FAX
< >