Filter
Top Products
Chapter 10 Special Sending Procedures 10-9
7. Press START/COPY.
8. You must set the transmission mode, so press < to choose YES.
❏ If you do not have any problems sending faxes to the relay
location, press START/COPY twice and go to the next step.
❏ If you have problems faxing to the relay location, see page
5-10 for details on Customizing the Transmission Mode before
you proceed.
9. Press the arrow buttons to display ORIG RELAY TX.
10. Press START/COPY.
11. Use the numeric keypad to enter the group number of the
relay fax.
12. Press START/COPY.
13. To register additional fax numbers for relay sending, begin
again from step 5. Otherwise, press STOP.
CODED RELAY TX
DATA ENTRY OK
CODED RELAY TX
*
00=GROUP # 00
CODED DIAL MODE 3
DATA ENTRY OK
CODED DIAL MODE 3
*
00=ORIG RELAY TX
< >
CODED DIAL MODE 3
*
00=REGULAR TX
< >
NEED TO SET TX MODE?
YES < > NO
Special Sending
Procedures