Filter
Top Products
Chapter 5 Sending Fax Documents 5-3
2. Press the arrow keys to change the density.
❏ Press < to darken the image and press > to lighten
the image.
3. Dial the number of the receiving fax.
❏ Use the numeric keypad to enter the number. See page 3-3
for details.
4. Press START/COPY.
The MultiPASS 1000 begins sending the document.
❏ The MultiPASS 1000 beeps once to indicate that the document
has been sent successfully.
❏ If an error occurs during sending, the MultiPASS 1000 beeps
intermittently for a few seconds. If this happens, try sending
the fax again.
❏ The MultiPASS 1000 automatically redials if the receiving
fax machine does not answer or if the line is busy. (You can
specify the number of times it redials; see Auto Redial, on
page 5-17.)
❏ To stop sending before the fax is finished, press STOP. You
may need to lift the operation panel to remove the document.
If so, be sure to close the operation panel and press STOP
again.
❏ If the ALARM light is flashing for any reason, correct the
problem and then press STOP. If necessary, refer to Chapter 14,
Troubleshooting.
TRANSMITTING OK
TEL = 12345678999
DOCUMENT READY
< >
Sending Fax
Documents