Filter
Top Products
Chapter 7 Receiving Fax Documents 7-3
6. Press the arrow buttons to change the setting to OFF.
7. Press START/COPY.
8. Press STOP.
Receiving Documents Automatically Over
a Dedicated Fax Line
When the MultiPASS 1000 is set up for a dedicated line, it
automatically receives documents whenever a call comes over the
fax line.
N
The MultiPASS 1000 cannot receive automatically if you are
making copies, printing reports, or registering information.
1. Make sure the MultiPASS 1000 is set to receive over a
dedicated fax line.
2. Press the ANS HOOK UP/MANUAL button.
❏ Make sure both the ANS HOOK UP and MANUAL lights are
off.
The MultiPASS 1000 assumes all incoming calls are from another
fax machine sending a document. It receives the documents
automatically.
❏ The MultiPASS 1000 receives documents in memory if the
paper runs out or if the ink cartridge runs out of ink. (See
Receiving Documents in Memory on page 7-7.)
❏ To stop receiving before the document is complete, press
STOP.
❏ If the ALARM light is flashing for any reason, correct the
problem and then press STOP. If necessary, see Chapter 14,
Troubleshooting.
MANUAL
ANS HOOK UP
FAX/TEL SWITCH
DATA ENTRY OK
FAX/TEL SWITCH
OFF
< >
Receiving Fax
Documents