Filter
Top Products
Chapter 10 Special Sending Procedures 10-7
7. Use the numeric keypad to enter the group number.
❏ If the group number is a single digit, precede it with 0.
❏ If you make an error entering the group number, press
CLEAR and then enter the number correctly.
8. Press START/COPY.
9. To use memory sending or to send to more than one relay fax,
press FUNCTION. Otherwise, go to step 11.
N
If you are sending to more than one relay fax, you must use
memory sending.
10. Press MEMORY TRANSMISSION.
11. Enter the fax number(s).
❏ If you are using direct sending, you can send to one relay
fax only.
❏ If you are using memory sending, you can send to up to 97
relay fax machines. See Sending to More Than One Location
on page 10-1 for details.
12. Press START/COPY.
❏ If you are using memory sending, the MultiPASS 1000
scans up to 50 letter-size pages (based on CCITT #1 Chart)
into memory. See Sending Large Documents on page 5-10 for
details.
The MultiPASS 1000 sends the document to the relay fax(es). See
Transmitting the Document on page 5-11 for details.
DOCUMENT READY
RELAY 08 MEMORY
SELECT MENU
DOCUMENT READY
RELAY 08
Special Sending
Procedures