Filter
Top Products
Chapter 10 Special Sending Procedures 10-19
Allowing Others to Poll Your MultiPASS 1000
Use this procedure to allow others to call your MultiPASS 1000 to
receive a document. Your polling ID must be 11111111 or the other
fax must be a Canon fax and must have your polling ID registered.
1. Press the ANS HOOK UP/MANUAL button.
❏ Both the ANS HOOK UP and MANUAL lights should be off. If
they are not off, press the ANS HOOK UP/MANUAL button
again until both lights are off.
2. Make sure you make the appropriate settings for sending the
fax.
N
Remember the receiving fax has no control over the document
settings (such as density control, type of document).
3. Place the document into the Automatic Document Feeder
(ADF).
Your MultiPASS 1000 sends the document when it receives a
polling request from the other fax.
To cancel polling before the MultiPASS 1000 sends the document,
remove the document from the feeder.
N
To turn off this feature, set your ID to 00000000.
Polling at a Preset Time
Use this procedure to request a document from another fax at a
preset time.
1. Press FUNCTION.
2. Press DELAYED POLLING on the one-touch speed dialing
keypad.
DELAYED POLLING
SET TIME 15:24
SELECT MENU
MANUAL
ANS HOOK UP
Special Sending
Procedures