Filter
Top Products
3-38
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 3 Configuring Remote Access to MPLS VPN
Configuration Examples for RA to MPLS VPN
!Specifies the RADIUS host and configures RADIUS accounting. radius-server retransmit is
!on by default and cannot be removed.
radius-server host 10.19.100.150 auth-port 1645 acct-port 1646
radius-server retransmit 3
radius-server key test
radius-server authorization permit missing Service-Type
radius-server vsa send authentication
call admission limit 90
!
RBE to MPLS VPN Configuration Example
Example 3-14 shows how to configure RBE on ATM interfaces, creates and associates two VRFs named
CustomerA and CustomerB, and configures DHCP Option 82 support for RBE connections.
Example 3-14 Configuring RBE to MPLS VPN
ip vrf CustomerA
rd 100:100
route-target export 100:100
route-target import 100:100
!
ip vrf CustomerB
rd 101:101
route-target export 101:101
route-target import 101:101
!
interface int g1/0/0
ip address 192.168.1.1 255.255.255.0
tag-switching ip
!
interface loopback0
! BGP update source
ip address 10.100.10.1 255.255.255.255
!
router ospf 1
network 192.168.1.0 0.0.0.255 area 0
redistribute connected
!
interface loopback 1
! description for VRF CustomerA
ip address 10.101.10.1 255.255.255.255
ip vrf forwarding CustomerA
!
interface loopback 2
! description for VRF CustomerB
ip address 10.102.20.1 255.255.255.255
ip vrf forwarding CustomerB
!
ip dhcp relay information option
ip dhcp relay information option vpn
!
interface atm7/0/0
no atm pxf queuing
!
interface atm7/0/0.1 point-to-point
ip vrf forwarding CustomerA
ip unnumbered loopback1
ip helper-address vrf CustomerA 192.168.2.1
atm route ip
range pvc 101/32 101/2031