Filter
Top Products
Contents
ix
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Configuring the Virtual Template Interface 5-29
Configuring the LNS to Initiate and Receive L2TP Traffic 5-29
Optional Configuration Tasks for LNS 5-30
Configuring per VRF AAA Services 5-31
Configuring a VRF on the LNS 5-36
Configuring Sessions per Tunnel Limiting on the LNS 5-36
Configuring RADIUS Attribute Accept or Reject Lists 5-37
Configuring the LNS for RADIUS Tunnel Accounting 5-39
Configuring the LNS for RADIUS Tunnel Authentication 5-42
Configuration Examples for LNS 5-45
Managed LNS Configuration Example 5-45
Tunnel Accounting Configuration Examples 5-47
Tunnel Authentication Configuration Examples 5-50
Monitoring and Maintaining LNS 5-51
CHAPTER
6 Configuring PPPoE over Ethernet and IEEE 802.1Q VLAN 6-1
PPPoE over Ethernet 6-1
Feature History for PPPoE over Ethernet 6-2
Restrictions for PPPoE over Ethernet 6-2
Configuration Tasks for PPPoE over Ethernet 6-2
Configuring a Virtual Template Interface 6-2
Creating an Ethernet Interface and Enabling PPPoE 6-3
Configuring PPPoE in a VPDN Group 6-3
Configuring PPPoE in a BBA Group 6-3
Configuration Example for PPPoE over Ethernet 6-5
Static MAC Address for PPPoE 6-5
Feature History for Static MAC Address for PPPoE 6-6
PPPoE over IEEE 802.1Q VLANs 6-7
Feature History for PPPoE over IEEE 802.1Q VLANs 6-7
Restrictions for PPPoE over IEEE 802.1Q VLANs 6-7
Configuration Tasks for PPPoE over IEEE 802.1Q VLANs 6-7
Configuring a Virtual Template Interface 6-8
Creating an Ethernet 802.1Q Encapsulated Subinterface and Enabling PPPoE 6-8
Configuring PPPoE in a VPDN Group 6-8
Configuring PPPoE in a BBA Group 6-9
Configuration Examples for PPPoE over IEEE 802.1Q VLANs 6-10
Verifying PPPoE over Ethernet and IEEE 802.1Q VLAN 6-11
Clearing PPPoE Sessions 6-12
TCP MSS Adjust 6-12