Cisco Systems 10000 Network Router User Manual


 
5-18
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 5 Configuring the Layer 2 Tunnel Protocol Access Concentrator and Network Server
Layer 2 Access Concentrator
buffers small permanent 15000
buffers middle permanent 12000
buffers large permanent 1000
!
interface Loopback1
no ip address
!
interface FastEthernet0/0/0
ip address 23.3.6.3 255.255.0.0
full-duplex
!
interface GigabitEthernet1/0/0
no ip address
no ip mroute-cache
negotiation auto
hold-queue 4096 in
hold-queue 4096 out
!
interface GigabitEthernet1/0/0.101
encapsulation dot1Q 101
ip address 103.1.1.1 255.255.255.0
!
interface ATM2/0/0
no ip address
no ip mroute-cache
atm clock INTERNAL
atm sonet stm-4
no atm auto-configuration
no atm ilmi-keepalive
no atm address-registration
no atm ilmi-enable
!
interface ATM3/0/0
atm pppatm passive
no ip address
no ip mroute-cache
atm clock INTERNAL
atm sonet stm-4
no atm auto-configuration
no atm ilmi-keepalive
no atm address-registration
no atm ilmi-enable
!
interface ATM3/0/0.41101 point-to-point
atm pppatm passive
pvc 41/101
encapsulation aal5snap
protocol pppoe
!
!
interface ATM3/0/0.41102 point-to-point
pvc 41/102
encapsulation aal5snap
protocol pppoe
!
!
interface ATM3/0/0.41103 point-to-point
pvc 41/103
encapsulation aal5snap
protocol pppoe
!
!