Filter
Top Products
4-18
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 4 Configuring Multiprotocol Label Switching
Session Limit Per VRF
Configuring Session Limit Per VRF
To configure the session limit Per VRF feature on the Cisco 10000 series router, enter the following
commands beginning in global configuration mode:
Command Purpose
Step 1
Router(config)# vpdn enable
Enables virtual private dialup networking (VPDN) on the router
and informs the router to look for tunnel definitions in a local
database and on a remote authorization server if one is present.
Step 2
Router(config)# vpdn session-limit
sessions
Limits the number of simultaneous VPN sessions that can be
established on a router.
The sessions option is the maximum number of simultaneous
VPN sessions that you want to allow on a router. Valid values are
1 to 10,000.
Step 3
Router(config)# vpdn-template
template-name
Configures a VPDN template and enters VPDN group
configuration mode.
The template-name option is the name of the VPDN template
Step 4
Router(config-vpdn)# group session-limit
number
Specifies the maximum concurrent sessions allowed across all
VPDN groups associated with the VPDN template you specified
in step 3.
The number option is a value from 1 to 32,767.
Step 5
Repeat steps 2 and 3 to configure additional named VPDN templates.
Step 6
Router(config-vpdn)# exit
Exits VPDN group configuration mode.
Step 7
Router(config)# vpdn-group tag
Associates a VPDN group to a customer or VPDN profile.
The tag option is the name of the VPDN group.
Step 8
Router(config-vpdn)# accept-dialin
or
Router(config-vpdn)# request-dialout
Enables the router to accept dialin requests and enters VPDN
accept-dialin group configuration mode.
Enables the router to send L2TP dialout requests and enters
VPDN request-dialout group configuration mode.
Step 9
Router(config-vpdn-acc-in)# protocol
protocol
or
Router(config-vpdn-req-out)# protocol
protocol
Specifies the tunneling protocol to be used.
Step 10
Router(config-vpdn-acc-in)# exit
or
Router(config-vpdn-req-out)# exit
Exits VPDN accept-dialin or VPDN request-dialout group
configuration mode.
Step 11
Router(config-vpdn)# source vpdn-template
template-name
Configures the VPDN group to use the VPDN template settings
for all unspecified parameters.
The template-name option is the name of the VPDN template to
be associated with a VPDN group.