Cisco Systems 10000 Network Router User Manual


 
20-42
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 20 Configuring L2 Virtual Private Networks
Configuration Tasks for L2VPN
Table 20-10 and Table 20-11 describe support for class map match criteria on various interfaces.
Table 20-10 describes match criteria support for inbound traffic and Table 20-11 describes support for
outbound traffic.
Table 20-10 Input (Imposition Router) Class Map Match Criteria
Match Criteria
Interface
ATM Ethernet Frame Relay HDLC and PPP
DSCP no no no no
IP precedence no no no no
MPLS EXP no no no no
IEE 802.1P bits no yes no no
Access-list no no no no
QoS group N/A N/A N/A N/A
Discard class N/A N/A N/A N/A
Input interface yes yes yes yes
Protocol no no no no
RTP no no no no
atm-clp no no no no
MAC address no no no no
Frame Relay DLCI no no no no
VLAN ID no no no no
Packet length no no no no
DE bit (Frame Relay) no no no no
Table 20-11 Output (Disposition Router) Class Map Match Criteria
Match Criteria
Interface
ATM Ethernet Frame Relay HDLC and PPP
DSCP no no no no
IP precedence no no no no
MPLS EXP N/A N/A N/A N/A
IEEE 802.1P bits N/A N/A N/A N/A
Access-list no no no no
QoS group yes yes yes yes
Discard class yes yes yes yes
Input interface yes yes yes yes
Protocol no no no no
RTP no no no no
atm-clp N/A N/A N/A N/A
MAC address no no no no