Filter
Top Products
9-9
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 9 Configuring Multihop
Monitoring and Maintaining Multihop Configurations
local name LAC1
l2tp tunnel password 7 060A0E23
l2tp tunnel receive-window 100
l2tp tunnel retransmit timeout min 2
!
Multihop Configuration
username user@cisco.com password 0 lab
!
vpdn enable
vpdn multihop
vpdn search-order multihop-hostname domain dnis
!
vpdn-group multihop0
accept-dialin
protocol l2tp
terminate-from hostname LAC1
local name HGW1
l2tp tunnel password 7 09404F0B
!
vpdn-group multihop1
request-dialin
protocol l2tp
multihop hostname LAC1
initiate-to ip 31.1.1.2 priority 1
local name HGW1
l2tp tunnel password 7 0507070D
!
LNS Configuration
vpdn enable
!
vpdn-group tunnel1
accept-dialin
protocol l2tp
virtual-template 1
terminate-from hostname HGW1
local name LNS1
l2tp tunnel password 7 04570A04
l2tp tunnel receive-window 100
l2tp tunnel retransmit timeout min 2
!
interface Virtual-Template1
ip unnumbered GigabitEthernet2/0/0
no keepalive
peer default ip address pool pool-1
ppp mtu adaptive
ppp authentication pap callin
!
ip local pool pool-1 4.2.0.0 4.2.255.255
Monitoring and Maintaining Multihop Configurations
To monitor and maintain multihop configurations and VPDN groups, enter the following commands in
privileged EXEC mode: