Support User Manuals

Cisco Systems 10000 Network Router User Manual

Open as PDF

of 624

1-23

Cisco 10000 Series Router Software Configuration Guide

OL-2226-23

Chapter 1 Broadband Aggregation and Leased-Line Overview

New Features, Enhancements, and Changes

• IP SLAs—LSP Health Monitor in the IP SLAs—LSP Health Monitor feature guide, located at the

following URL:

http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a0080528450.html

• IPv6 in Chapter 24, “Configuring IP Version 6”

• L2TP Congestion Avoidance in the L2TP Congestion Avoidance feature guide, located at the

following URL:

http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a00805f040e.html

• Layer 2 Local Switching in Chapter 20, “Configuring L2 Virtual Private Networks”

• Link Fragmentation Interleave Over Frame Relay (FRF.12) in the Cisco 10000 Series Router Quality

of Service Configuration Guide, located at the following URL:

http://www.cisco.com/en/US/products/hw/routers/ps133/products_configuration_guide_book0918

6a00805b9497.html

• Logging to Local Non-Volatile Storage (ATA Disk) in the Syslog Writing to Flash feature guide,

located at the following URL:

http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a0080611212.html

• MLP Connections in Chapter 22, “Configuring Multilink Point-to-Point Protocol Connections”

• MLPPP with Link Fragmentation Interleave (LFI) in the Cisco 10000 Series Router Quality of

Service Configuration Guide, located at the following URL:

http://www.cisco.com/en/US/products/hw/routers/ps133/products_configuration_guide_book0918

6a00805b9497.html

• MPLS Carrier Supporting Carrier (also known as MPLS VPN—Carrier Supporting Carrier) in the

following feature guides. These guides are located at the following URL:

http://www.cisco.com/en/US/products/ps6566/products_feature_guides_list.html

–

LDP: MPLS VPN—Carrier Supporting Carrier

–

BGP: MPLS VPN—Carrier Supporting Carrier—IPv4 BGP Label Distribution

• MPLS Embedded Management—LSP Ping/Traceroute and AToM VCCV in the MPLS Embedded

Management—LSP Ping/Traceroute and AToM VCCV feature guide, located at the following URL:

http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a008063d009.html

• MPLS Egress Netflow Accounting in the MPLS Egress Netflow Accounting feature guide, located

at the following URL:

http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a0080611269.html

• MPLS High Availability Overview in the MPLS High Availability: Overview feature guide, located

at the following URL:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/products_feature_guide09186a00805ad

326.html

Note In Cisco IOS Release 12.2(28)SB, the Cisco 10000 series router supports Route Processor

Redundancy Plus (RPR+) and Stateful Switchover (SSO). However, for broadband aggregation

features the router supports RPR+ only.

• NSF/SSO—MPLS LDP and LDP Graceful Restart in the NSF/SSO—MPLS LDP and LDP Graceful

Restart feature guide, located at the following URL:

previous next